E538 Sodium cyanotrihydroborate - AK Scientific
Loading Please Wait...
  Catalog ID # E538
Sodium cyanotrihydroborate
, 95%
Sodium cyanoborohydride

CAS Registry #:[25895-60-7]
MDL Number:MFCD00003516
Physical Form:White to off-white to light yellow to beige powder
Melting Point:>242°C
Long-Term Storage:Store at room temperature
Shipping:Regulated for Shipping
UN #:UN3179
Hazard Class:4.1 (6.1)
Packing Group:II

Risk Description(s)
R11:Highly flammable.
R15:Contact with water liberates extremely flammable gases.
R16:Explosive when mixed with oxidizing substances.
R26/27/28:Very toxic by inhalation, in contact with skin and if swallowed
R32:Contact with acid liberates very toxic gas.
R34:Causes burns.
R50/53:Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment

Safety Description(s)
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S28:After contact with skin, wash immediately with plenty of ... (to be specified by the manufacturer).
S36/37/39:Wear suitable protective clothing, gloves and eye/face protection.
S43:In case of fire, use ... (indicate in the space the precise type of fire-fighting equipment. If water increases the risk, add - Never use water).
S45:In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
S50:Do not mix with ... (to be specified by the manufacturer).
S60:This material and its container must be disposed of as hazardous waste.
S61:Avoid release to the environment. Refer to special instructions/Safety data sheets.


CURRENT AS OF: September 30, 2016

1. Backordered: Please contact us for availability.
2. All prices FOB San Francisco, USA

HazMat shipping information is based on IATA/DOT regulations. All of the information is for reference only and subject to change without notice.

1. All products' quality is guaranteed.
2. Lot-specific spectra and CoA available on request.

AK Scientific products are intended for Research and Development usage only. The products are not to be used for other purposes, including, but not limited to, human or animal use, or as a component in, a food, drug, medical device (including in vitro diagnostic reagents), cosmetics and pesticides.

The hazards associated with this chemical have not been fully evaluated. This chemical is to be used for research and development purposes only, under the supervision of a technically qualified individual.

AK Scientific is not an EPA registered pesticidal establishment. Our products are not intended for pesticidal applications.




 Reagents > Reduction